Candy Machines logo
Candy Machines logo

All articles

Electronic Sticker/Tattoo and Capsule Machine Technical SpecificationsUpdated a month ago

Technical Specifications

SpecificationUnit AUnit B
Dimensions47.5” H × 17.75” W × 11.875” D47.5” H × 16.75” W × 11.875” D
Weight~106 lbs~106 lbs
Power Requirements110V / ~10W idle, higher during motor use110V / ~10W idle, higher during motor use
Vend Type / Capacity2 Sticker Selections + 1 Capsule Selection2 Capsule Selections
Cabinet MaterialMetal cabinet with locking compartmentsMetal cabinet with locking compartments
Sensors4 total (jam detection, low inventory, dispense verification)Dispense sensors for each capsule section
Motors3 total (1 capsule, 2 sticker)2 total (1 per capsule section)
Wheels2 rear wheels for movement2 rear wheels for movement
Satellite SupportMaster control for Unit BRequires Unit A to function



Was this article helpful?
Yes
No