Mini & Jumbo Extreme - Setup Steps:Updated 2 months ago
- Unbox and position the machine on a level surface.
- If the surface is uneven, install the included rear leveling brackets using the bolt pattern on the back of the cabinet.
- Plug the machine into a standard 110V outlet.
- Use the joystick and buttons to access system settings.
- Adjust key configurations:
- Set game mode to Normal.
- Adjust volume either via system settings or physical dial.
- Select LED color and one of two available music tracks.
- Set win percentage (recommended: 15%) and buy-it-now credit amount.
- Configure claw strength for high, medium, and low settings based on prize size and desired win frequency.
- Enable/disable Air Catch mode and configure movement speeds (left/right, front/back, up/down).
- Calibrate the claw drop depth and confirm prize chute sensor alignment.
- Use the Test Gantry function to automate claw movement and confirm gantry pathing and claw grip.
- (Optional) Install a Nayax or Cantaloupe card reader using the included, color-matched faceplate.
- If you prefer not to use the locker box, install the included header plate instead.